Winch operation and use

1, first of all, you should check whether the status of the winch is suitable to start work. After using the Fromwinch winch for 4x4 for the first time or replacing the steel cable for the winch, apply a special grease for the cable to the cable.
2. Unclip the winch clutch (any type of lever equipment to the OUT position) and pull out the cable. Normally, the winch drum has at least four turns of wire to prevent the cable from slipping off the wheel drum. Wire rope in this position before the red mark, pull out the cable must not exceed this mark.
3, connection clutch (any kind of lever equipment to the IN position).
4, plug in the operating handle connector, according to the instructions of the handle button and the actual working state winch control winch, rescue work began.
5, such as the need to adapt to more rescue, it is recommended to configure the necessary additional trailer spare parts to assist the work of the winch, including but not limited to: 1. Car winches 1. Stainless steel trailer ball 2. Stainless steel trailer seat 3. Forged trailer seat 4 . Trailer cover 5. Guiding rope device 6. Winch fixed base plate 7. Manual winch 8. Mechanical off-road jack 9. Safety harness 10. Trailer rope 11. Cable 12. Stainless steel heavy pulley 13. Pulley hook pulley 14 . Non-slip gloves 15. U-type shackle 16. Hook 17. Ground anchor.