If your car is not before the trailer hook, the capstan wire hook on a certain part of the frame, and not hooked in such as the front axle, steering rods, shock absorbers or bumper, these parts can not withstand the pull of the winch, Will be bent or broken. The towline of the fromwinch 4WD Electric Winch line should be hooked up on the trailer hook so that the capstan line breaks or the tow hook slips down to the ground instead of flying into the air. Get the maximum tension can be easily dragged with a single line, more difficult to use the pulley should be dragged with two-lane. Use a small load of the fromwinch heavy duty winch cable or drag a particularly large load, you can even use three lines to obtain greater tension. Pull the capstan line out of the car and go back to the front of the car by the pulley on the tree-carrying belt, around the pulley on the trailer hook, and then back to the tree belt. This is the way to deal with most winch , But keep in mind that this method will make your fromwinch electric wire winch overload. With two or three lines, the cost of lifting the speed of the loss. Two-wire pull the car forward speed is half of the single-line, three-wire speed is one-third of the line.