How to Operate Electric Winch Properly

First, the Fromwinch competition auto Winch must be easy to see on the place, not on the inconspicuous corner, and must be safe and open place. The traction macro diverter pulley should be installed at a distance not less than 40 times the length of the drum. Height must exceed the wooden stack 2-3 meters, is strictly prohibited in the crib on the guide pulley. Operation of the time need to focus on the operation when the rigorous operation of more than one person, run time, is strictly prohibited all personnel into the rope angle zone. In the inspection and maintenance, we found that one of the following circumstances wire rope must be re-replaced or scrapped: foreign wire wear to wire diameter of one-half; in a pitch within the number of broken wire 6-8 apply; The use of wire rope, the pitch elongation of 10% of a wire all broken, there are dead ends or serious corrosion of wire rope.
Second, before starting the Fromwinch electrical cable winch machine, you should check whether there is a sufficient number of oil in the transmission, the need for lubrication of the parts have been lubricated, the gear teeth and teeth between the debris. In winter, the lubricating oil in the gear reducer tends to condense, so check the shaft of the inspector before starting. When starting the electric winch, brake the reel, open the electrical switch, connect the necessary gears in the gear unit, and then link the motor Of the clutch, that is, to rotate the reducer shaft.